Examples of New House Being SUPERSEALED 

Foam Behind All Electrical Boxes................      

Caulk and seal between all headers, seams,and plates.  Fill all blind corners with either foam or cellulose.  Block off air between eaves, and vent chutes, so the wind goes through the vent chutes and into the attic but DOES NOT blow the insulation away from the plate and start the whole CONDENSATION AND BLACK MOLD PROCESS.

Install netting in ceiling and cantilever floor areas that have to be "tight packed" with cellulose, because there is no side access to fill them with a hose.

Start spraying High Density Cellulose, it's not as easy as it looks!  It is half science and half art to be able to spray correctly.

Next, use the Scrubber to clean off the excess, and be flush with the studs.

This area is ready for drywall!

Perfect example of cellulose in a BONUS ROOM above a garage.  We also sprayed 1" of foam over the vent chutes for air to pass up to the attic and still have room to add a fiberglass batt.

Looks Great!  Final R-value in knee wall is about R-13 and R-25 in 2x6 slope ceiling.

CELLULOSE VIDEO CLICK HERE  MAY TAKE SOME TIME TO DOWNLOADMORE VIDEO